Model No.: BS-AN05-003
- Model NO.: BS-AN05-003
- Type: Round Head
- Head Style: Round
- Grade: 8.8
- Finish: Natural
- Diameter: 5
- Weight: 6.28g
- Available Material: Carbon Steel, Stainless Steel or Brass
- Specification: 5x48mm
- HS Code: 7318190000
- Material: Zinc Alloy
- Connection: Common Bolt
- Standard: ANSI
- Application: Building
- Product Name: Ceiling Anchor
- Length: 48mm
- Usage: Structural Anchorage, Seismic Attachments, Retrofi
- Trademark: BEISHUO
- Origin: Ningbo, China
Hot Dip Anchor Bolts Hook Type Decortive Suspended Nail Ceiling Anchor
Metal: zinc plated carbon steel and stainless steel.
Head style: acorn, hex, flat, round, rod.
Detail size table see the bottom of the page.
The anchor is available for five head styles: hex, round, flat, acorn, rod.
The installation is easier and faster
The anchor and the hole are of the same size.
The sleeve anchor can be installed in solid concrete, brick or block base material.
The anchor is good for light to heavy duties.
Concrete sleeve anchor comes fully assembled and ready to use
The minimum distance between the two anchors is ten anchor diameters and the minimum distance between the anchor and the edge is five anchor diameters.
1.Drill a hole with a hammer and carbide tipped drill Bit. The diameter of the hole should be equal to the diameter of the concrete sleeve anchor.
2.Clean out all the debris.
3.Set the nut until it's flush with the top of the sleeve anchor.
4.Insert the sleeve anchor through the fixture into the hole, the washer and nut should be tight against the fixture.
5.Turn the nut until it's firm enough.
6.Set the anchor by turning the nut three to four full turns
7.We tighten the acorn and hex nut sleeve with a standard Wrench, and we tighten the flat and round headed sleeves with either a Phillips or flat screw driver.
Sleeve anchor can be used in many materials for light to heavy fastening duty. Usually this type concrete anchor is used in concrete, brick, and block.
Your inquiry will be replied in 24hrs.
Distributorship are offered for your unique design and some current models.
Protection of your sales area, ideas of design and all your private information.
Top quality + reasonable price + responsible after service = successful & win.
Yuyao BeiShuo Hardware Co., Ltd. is specialized in wheel lug nuts, wheel lug bolts, wheel locks, wheel adapter, wheel spacer, hub centre ring, Socket Spanner, pressing and plastic products. Our products are in complete range of articles , and offered at reasonable price.
BEISHUO adheres to quality first, stresses on quality management, and adhere to people oriented policy and continued innovation. BEISHUO strictly carries out ISO9001: 2000 quality management standard and keeps developing new products to satisfy market demands. The products are exported to Europe, US, Middle East and other countries and regions, and deeply favored by domestic and foreign clients.
We Operate under the principle of "Better quality, Better price and Better cooperation". BEISHUO wholeheartedly welcome honored guests both at home and board to business negotiation.